HO World

Things to do before you start:

1. We give you the exact amount of materials. Start at one end of the piece, and insert to the other end of the piece before you cut.

2. Use a slow drying glue, water soluble if possible. (Note: Least amount of glue is best)

3. Work as close to the project as you can.

4. Go in small steps, no more than 8 inches at a time.

5. Lockwire goes INSIDE of the rail, towards the pin slot side.

6. It's important that the rail be flush to the bottom.

Note: If you have trouble viewing the video, click here, and download the file named "RailInsert3.mp4".


			A visual guide to help you with installation of rail and lock wire. Things to do before you start: 1. We give you the exact amount of materials. Start at one end of the piece, and insert to the other end of the piece before you cut. 2. Use a slow drying glue, water soluble if possible. (Note: Least amount of glue is best) 3. Work as close to the project as you can. 4. Go in small steps, no more than 8 inches at a time. 5. Lockwire goes INSIDE of the rail, towards the pin slot side. 6. It's important that the rail be flush to the bottom. Note: If you have trouble viewing the video, click here, and download the file named "RailInsert3.mp4".

	This movie is only a suppliment to Brad's HOW TO BUILD A CUSTOM ROUTED TRACK book. Please consider purchasing the book if you intend to try this. It gives a lot of invaluable tips. If you want a custom track, please contact us by email for more information.